Label & Packaging

Adhesive transfer tapes are tapes where the adhesive layer is directly applied to the release liner or thin film,creating a tape with adhesive on both sides.They come in various formulations,adhesive strengths,and liner material to suit different application requirements.

• Excellent tack and adhesion to different surfaces
• Easy application with precise positioning
• Invisible after application
• Good shear strength

Bopp tape, also known as Biaxially Oriented Polypropylene tape, is a widely used adhesive tape made from polypropylene film that has been biaxally oriented, meaning it is stretched in two directions during manufacturing process and pressure sensitive water based adhesive coated on one side.

• Moisture and temperature resistant.
• High tensile strength and adhesive strength

Surface protection film are typically made from polyethylene(PE) or polypropylene(pp) and coated with water based acrylic adhesive which allows it to stick to different surfaces (like Easy peel/gloss/matt/textured matt) securely.

• No residue of glue on the target surfaces after removal.
• Uniform and stable
• Resistant to moisture,chemicals and moderate weather changes.

Crepe paper tape, also known as crepe masking tape is a adhesive tape made from crepe paper. It is similar to masking tape but has textured ,crepe like surface and has durability than regular masking tapes.

• Hand tearable with good adhesion for temporary period.
• No residue after removal.
• Can write with pens and markers over it.

Cross-filament tape consists of strong tear-resistant polyester film that is reinforced with fiberglass filaments running in both directions, forming a cross-hatch pattern, and synthetic acrylic adhesive is coated on one side.

• Excellent tensile strength and resistance to tear and abrasion
• Resistant to water and weather
• Versatile and durable

Double sided cloth tapes are made from a woven cloth backing with acrylic adhesive on both sides.The adhesive is usually coated with a release liner on both sides to protect it until its ready to use.

• High adhesive strength
• Intended for safe removal
• Conform to irregular surfaces
• Reusable

Double side tissue tape consists of a non woven tissue and coated with high grade strong adhesive on both sides. Solvent adhesive consists of a polymer dissolved in a solvent, which evaporates upon application, leaving behind a sticky residue that bonds surface together.

• Permanent and strong bond
• Resistance to temperature, light and aging.
• Excellent adhesion to wide range of materials like paper, plastic, metal and wood.

Double side tissue tape consists of paper backing with hotmelt adhesive applied on both the sides.The paper backing provides stability and strength to the tape.

• Great Initial Tack
• Resistance to temperature, light and aging.
• Excellent adhesion to wide range of materials like paper, plastic, metal and wood.

Double sided clear acrylic foam tapes consists of a layer of clear acrylic foam on both sides.The visco elastic nature ensures strong bond,for better bonding - the use of special primer is suggested.

• Resistance to UV,solvent,moisture and temperature.
• Suitable for indoor and outdoor applications
• clear adhesive ensures discreet bonding without visible adhesive

Double sided grey acrylic foam tapes consists of a layer of grey acrylic foam on both sides with a red liner.The visco elastic nature ensures strong bond,for better bonding - the use of special primer is suggested.

• Resistance to UV,solvent,moisture and temperature.
• Suitable for indoor and outdoor applications

Duct tape is a combination of polythylene film and cloth scrim backed with rubber adhesive which helps to provide strong bond to different kinds of surfaces like fabric, plastic, metal, wood and more.

• High tensile strength
• Water and UV resistant
• Good holding power

Floor marking tape are made from durable materials like PVC and coated with very strong residue free adhesive. It mandatory to use for companies registered under IS0-9001.

• Excellent resistant to chemicals, water, and other objects.
• Increased visibility.
• Easy application with long lasting life.

Glue sticks are solid adhesives that come in stick form, usually contained within a twist up or push up tube. The adhesive is made from a combination of synthetic polymers, resins, and waxes allowing it to stick to different surfaces.

• Clean and mess free application
• Quick drying

HDPE tape, is made from High-Density Polyethylene, which is thermoplastic polymer, which provides greater strength and durability and coated with rubber adhesive on one side. It can also come with a liner for ease removal if required.

• High Resistant to moisture,chemical and abrasion.
• Easy to handle

Kraft paper tape is made from paper fibres coated with water based pressure sensitive adhesive on one side allowing it to stick to different surfaces.

• Environmental Friendly and sustainable - A next generation product
• Moderate strength to hold on medium weight packages.

Lamination tapes are typically transparent and have glossy or matte finish which are made from BOPP crystal clear film coated with speciality water based adhesive and solvent based adhesive respectively.

• High clarity
• Resistance to wear and tear and highly stretchable.

Low noise Bopp tape, also known as Biaxially Oriented Polypropylene tape, is a widely used adhesive tape made from polypropylene film that has been biaxially coated with pressure-sensitive water-based adhesive coated on one side, which is designed to minimize noise during application and use.

• Moisture and temperature resistant.
• High tensile strength and good adhesive strength.
• Excellent clarity

Pink rayon tape is made from rayon fabric which is dyed in pink color and a layer of adhesive is applied to one side.

• Self-extinguishing
• Hand tearable.
• High resistance to abrasion, chemicals and weather.

Bopp tape, also known as Biaxially Oriented Polypropylene tape, is a widely used adhesive tape made from polypropylene film coated with pressure sensitive water based adhesive coated on one side. Printed bopp tapes allow for branding, labelling, or adding important information on the tape such as company logos, handling instructions or cautionary messages.

• Moisture and temperature resistant.
• High tensile strength and adhesive strength
• Cost effective tool for advertisement.

Reinforcement paper tape is often reinforced with fibreglass threads to enhance its strength and coated with water based adhesive on one side. The reinforcement provides added durability and ensures that tape remains intact.

• High tear resistance and resistance to temperature.
• High adhesive strength.

Security tapes, also known as void tapes or tamper-evident tapes, are specialized adhesive tapes that are backed by PET film and coated with acrylic adhesive. They are used to enhance security and deter tampering during transportation, shipping, or storage.

• One time use as it cant be stuck back down
• Any attempt to peel off the tape, it would show VOID/OPEN but no adhesive residue is left on surface.

Stretch film is versatile packaging material ,physically it is a thin and flexible film made of polythylene or other similar materials and coated with a very little adhesive.

• High elasticity and stretchability.
• High tensile strength.
• Super Transparent.

Bopp tape, also known as Biaxially Oriented Polypropylene tape, is a widely used adhesive tape made from polypropylene film that has been biaxally oriented, meaning it is stretched in two directions during manufacturing process and pressure sensitive water based adhesive coated on one side.

• Moisture and temperature resistant.
• High tensile strength and good adhesive strength.
• Excellent clarity

Thermal conductive tapes are composed of a base material, such as silicone ,acrylic or sometimes combination of both, which is coated with thermally conductive filler mixed adhesive..

• Facilitate the transmission of heat between two bonded surfaces.
• Easy to apply with consistent thermal performance.
• Creates a direct thermal pathway between surfaces.